MonoWave(X) User Manual
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
4 of 26
MonoWave(X) User Guide
Setting up the instrument
Connect the [
MIDI IN
]
socket
to the
MIDI OUT of your MIDI controller
such as a keyboard or computer
Connect the [
AUDIO OUT
]
socket to
the line input of your mixer or amp.
Make sure the gain/level/volume
control is set low
Connect the [
POWER
] socket to a
suitable power source*
Turn [ON] the MonoWave(X) which
should now show an information
screen indicating that the MonoWave(X)
is powered on.
Press the [
F1+
]
and the [
F4-
]
button together to select the MIDI channel display.
Select the MIDI channel you wish the MonoWave(X)
to receive on by pressing the
[
F1+
] and [
F1-
] buttons
Press [
F4-
] to exit back to the main system
Now set up a patch like that shown below
Press a key on your keyboard and hold it.
Slowly increase the gain of your mixer or amp until the level is OK for your
equipment.
You should hear the first sounds from your MonoWave(X)
now.
Alternate rear panel layout
External power supply should be a well regulated 15VDC supply terminated with a
2.5mm DC plug (tip = positive).