Studio 300 Assembly
Place all the parts out on a flat surface as shown in Figure 1. Depending on the
configuration you have chosen, you may have more or less Skins (and associated M4
bolts).
Figure 1 – Studio 300 parts laid out
The Skins should all be
orientated in the same
direction.
Join the Skins together using
M4 pan-head bolts. These
bolts will utilize the holes on
the left-side of the skins
without bushes as shown in
Figure 2.
ELBY Designs - Laurie Biddulph
3 Therese Street, Bripdort, TAS 7262, Australia
1 of 5
