- 14 -
- 14 -
4000 4 200_Rev1 - 12/09
4000 4 200_Rev1 - 12/09
ENGLISH
3.2.4 Parallel Mode
It allows to adjust the power-supply from 0 to 30V with a current from 0 to 6A. The
voltage and current regulations of the Slave power-supply "B" are driven from the
Master one "A" ; the magnitudes beeing displayed on the master power-supply.
the Slave power-supply "B". The regulation of the slave voltage is driven by the master
one. The current setting remains independant and adjustable from
0 to 3A for each power-supply.
3.2.5 Modes of the Auxiliary power-supply
Two functional modes are possible :
«2V to 5.5V - 3A» mode : the auxiliary power-supply is adjustable from less than 2V
to 5.5V and delivers a current of 3A.
«5.5V to 15V - 1A» mode : the power-supply delivers a voltage from 5.5V to 15V with
a current of 1A.
The voltage is displayed with a 10mV resolution in the "2V to 5.5V" mode and with
a 100mV resolution in the "5.5V to 15V" mode.
3.2.3 Series Mode
It allows to adjust the power-supply from 0 to 60V with a current from 0 to 3A. The
voltage and current regulations of the Slave power-supply "B" are driven from the
Master one "A" ; the magnitudes being displayed on the Master power-supply.
Voltage display
Current display
MASTER
Power
SLAVE
Power
SERIES
Mode
Current regulation
STANDBY
Mode
Voltage regulation
MASTER
Output
SLAVE
Output
Voltage display
Current display
Voltage display
Current display
MASTER
Power
SLAVE
Power
TRACKING
Mode
Current regulation
Current regulation
STANDBY
Mode
Voltage regulation
MASTER
Output
SLAVE
Output
Voltage display
Current display
MASTER
Power
SLAVE
Power
PARALLEL
Mode
Current regulation
STANDBY
Mode
Voltage regulation
MASTER
Output (+)
AUXILIARY MODE
Variable 2 - 5.5V
Voltage display
Voltage regulation
3A
Current display
Current regulation
Variable 5.5 - 15V
1A
Power
Output
ENGLISH
3.2.4 Parallel Mode
It allows to adjust the power-supply from 0 to 30V with a current from 0 to 6A. The
voltage and current regulations of the Slave power-supply "B" are driven from the
Master one "A" ; the magnitudes beeing displayed on the master power-supply.
the Slave power-supply "B". The regulation of the slave voltage is driven by the master
one. The current setting remains independant and adjustable from
0 to 3A for each power-supply.
3.2.5 Modes of the Auxiliary power-supply
Two functional modes are possible :
«2V to 5.5V - 3A» mode : the auxiliary power-supply is adjustable from less than 2V
to 5.5V and delivers a current of 3A.
«5.5V to 15V - 1A» mode : the power-supply delivers a voltage from 5.5V to 15V with
a current of 1A.
The voltage is displayed with a 10mV resolution in the "2V to 5.5V" mode and with
a 100mV resolution in the "5.5V to 15V" mode.
3.2.3 Series Mode
It allows to adjust the power-supply from 0 to 60V with a current from 0 to 3A. The
voltage and current regulations of the Slave power-supply "B" are driven from the
Master one "A" ; the magnitudes being displayed on the Master power-supply.
Voltage display
Current display
MASTER
Power
SLAVE
Power
SERIES
Mode
Current regulation
STANDBY
Mode
Voltage regulation
MASTER
Output
SLAVE
Output
Voltage display
Current display
Voltage display
Current display
MASTER
Power
SLAVE
Power
TRACKING
Mode
Current regulation
Current regulation
STANDBY
Mode
Voltage regulation
MASTER
Output
SLAVE
Output
Voltage display
Current display
MASTER
Power
SLAVE
Power
PARALLEL
Mode
Current regulation
STANDBY
Mode
Voltage regulation
MASTER
Output (+)
AUXILIARY MODE
Variable 2 - 5.5V
Voltage display
Voltage regulation
3A
Current display
Current regulation
Variable 5.5 - 15V
1A
Power
Output
