4000 4 362-03-21
4
ENGLISH
2.3 SAFETY INSTRUCTIONS
Before any operation, read the following safety precautions to avoid injury and
prevent damage to this product or another connected.
o
To avoid all potential hazards, use this product only in the specified
limits.
o
Do not use the device without its cover. Do not use the item with its
housing or any panels removed.
o
Any intervention inside the casing, and particularly the fuses replacement,
must imperatively be effected by a skilled staff.
o
The instrument must be used according to the instructions of this manual.
o
Use it in a well ventilated area. The air inlets and the fan outlet must be
widely free, do not block them.
o
Do not use in wet conditions. Do not use in wet environment to avoid
electric shocks or short-circuit inside the product.
o
Do not use in an explosive atmosphere. It is very important do not operate
the item near an explosive atmosphere, to prevent damage to the device
or any personal injuries.
o
The power cable is used as a cut system, the product must be connected
to a 230V main source, easily accessible, with earth.
o
When this unit must be powered via a separate autotransformer for a
reduction of voltage, ensure that the common socket is connected to the
grounding pole of the circuit of the supply.
o
The common mode voltage between ground and the output
terminals must not exceed 150VDC. In this case a deemed dangerous
voltage (> 60VDC) can be reached between one of the terminals and earth.
Therefore, it is imperative to use safety cables to connect the outputs of
the device. Also, all connected devices must not have conductive parts
accessible.
2.4 SAFETY TERMS AND SYMBOLS
You will find the following symbols on this equipment :
2.5 PACKAGING AND REPACKAGING
Your power supply ALR3203 comes with an quickstart guide and its power cable 2 poles + earth type
"EUROPE" : CEE7 / 7 - IEC60320 C13.
CAUTION REFER
TO MANUEL
CAUTION HIGH VOLTAGE
RISK
PROTECTIVE GROUND (EARTH)
TERMINAL
