USER MANUAL
42/12494 Splitter V2.0 1x2 out 4Kx2K@60Hz
42/12507 Splitter V2.0 1x4 out 4Kx2K@60Hz
42/12557 Splitter V2.0 1x8 out 4Kx2K@60Hz
Table Of Contents
1.0 Introduction........................................................................01
2.0 Feature...............................................................................01
3.0 Specification.......................................................................02
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual for future reference
1.0 Introduction
The V2.0 HDMI splitter 1x2/1x4/1x8 lets you share more HDMI displays or projectors (check models) with
an HDMI-enabled audio / video source device. With support for Ultra HD (4K@60Hz) the HDMI splitter ensures
astonishing picture quality, four times the resolution of HD 1080p@60 Hz. The 4K splitter is also
backward compatible with previous HDMI revisions, supporting 1080p / 720p HDMI video resolution devices. Even
if you don't require 4K video today, the V2.0 HDMI Splitter 1x2/1x4/1x8 ensures you'll be ready to take advantage of
tomorrow's display technology.
2.0 Features
* Compatible with HDMI 2.0
* Support full 3D video format
* Support high resolution up to 4096X2160@60Hz
* Support highest data transfer rate up to 6.0Gbps per channel (18Gbps all channels)
* TMDS clock can be up to 600MHz
* Support 8/10/12 bit deep color
3.0 Specification
Input Signal
HDMI Signal
Output Signal
HDMI Signal
Supported Highest Resolution
4096x2160@60Hz
HDMI Version Compliance
V2.0 and backwards compatible with the earlier versions
Video Amplifier Bandwidth
6.0Gbps/600MHz per channel
Supported Audio Format
DTS-HD/Dolby-true HD/LPCM7.1/DTS/Dolby-AC3/DSD
Supported Cable Length
(AWG26 Standard HDMI
Cable)
Input≤15m ,output≤25m( with/under 1080p resolution)
Input≤12m ,output≤15m( with 4k resolution)
Operating Temperature
0°C to 70
℃
Storage Humidity
5% to 90% RH (no condensation)
Note: Specification is subject to change without notice.
6.0 Connection and Operation
1) Connect the HDMI input source and output devices into the HDMI Splitter.
2) Insert the DC connector of 12V/3A power supply into the splitter and then connect the AC connector of the power
supply into the wall outlet.
3) Turn on the power.
Attention: Insert / Extract cable gently.
