18
User level
In addition to operational settings, the
time of day and the timer settings for
the activated timer channels can be set
at the user level. If no functions are
activated by timer channels, the clock
key can only be used to display and set
the time of day.
MAX1
Maximum storage tank heat transfer
temperature for storage tank 1 (upper
heat transfer temperature limit) with
reference to measurement TSP1 when
temperature sensor TSP1 is connected
or with reference to measurement
TSR1 if temperature sensor TSP1 is
not connected.
MAX1
range: 10 .. 90°C;
default setting: MAX1 = 70°C.
MAX2
Maximum storage tank heat transfer
temperature for storage tank 2 (upper
heat transfer temperature limit) with
reference to measurement TSP2 when
temperature sensor TSP2 is connected
or with reference to measurement
TSR2 if temperature sensor TSP2 is
not connected. MAX2 is only displayed
if the system configuration includes
storage tank 2.
MAX2
range: 10 .. 90°C;
default setting: MAX2 = 70°C.
MAX3
Maximum storage tank heat transfer
temperature for storage tank 3 (upper
heat transfer temperature limit) with
reference to measurement TSP3 when
temperature sensor TSP3 is connected
or with reference to measurement
TSR3 if temperature sensor TSP3 is
not connected. MAX3 is only displayed
if the system configuration includes
storage tank 3.
MAX3
range: 10 .. 90°C;
default setting: MAX3 = 70°C.
Navigate to the user level by pressing
the (+) or (-) key. The parameter set-
tings can be changed after pressing the
(+) or (-) key a second time. Press the
enter key to move to the next displayed
value.
Some of the parameters are accessible
from the user level and some from the
professional installer level (level "E3")
User level parameter settings (AE)
Parameter settings that need to be set
by the user are set at the user level. Do
not adjust the user settings until after
the appropriate system circuit schema-
tic has been selected (E3 - 1 No 1),
since all parameters are reset to the
factory default setting when a different
schematic is selected.
Summary of Contents for LOGON SOL plus
Page 22: ...Notes...
Page 23: ...Notes...