21
Servicing and Maintenance
Product:
Espresso-Machine
Model: Semi-automatic,
built-in
Service Instruction: 4/04 Stops - blocking
Problem:
The dual function of the drawer handle is not
working properly. When the drawer is pulled out,
the whole appliance slides forward out of its housing because the
blocking mechanism is not working.
Only when the drawer handle is lifted and pulled should the appliance come out
of its housing. By simply pulling the drawer handle, only the drawer should come
out.
Cause:
The movement required to slide the appliance out of its housing is for the handle
to be grasped and lifted slightly upwards; when this mechanism is working
correctly the stops blocking the appliance on the right and left sides of the
machine are released, so that the appliance slides along the glides and can be
pulled forward. Sometimes a production defect means that these stops are not
locked into position behind the corresponding groove (they do not fall into
position) so that the appliance is pulled forward out of its housing every time the
drawer is opened.
Solution:
The plastic stops need to be filed down so that they engage with the
grooves on the glide frames on the housing of the appliance.
Safety Advice for Service Engineers
Attention: Before commencing any work on the appliance, it should be “disconnected”
from the electricity supply. This can be done by:
either removing the appliance plug from the mains socket or by isolating electricity
supply to socket through safety circuit-breaker or by turning off electricity completely
at mains switch.
Summary of Contents for SUPREME DED400XP1
Page 1: ...EXPRESSO DED400XP1 ...
