39
10.
You should now prepare the new gear motor assembly so that all plug connections
have unmistakable >>male<< and >>female << terminals and so that the
electrical connections that will be set up will work correctly. Now, working in
reverse order, firstly replace the gear motor into its corresponding shaft and
roughly position. Then connect up the blue and brown wires using suitable plugs
and insert the earth wire through the corresponding gap in the housing so that it
comes out into the front section of he machine and, there, reconnect it to the
water valve.
Photo 10/1
11.
Now the worm screw forming part of the angled transmission on the grind
selector should be positioned so that it engage with the teeth of the gear motor
wheels. At the same time, the coffee outlet on the grinder must be positioned so
that it is matches that of the coffee hopper at the front and connection in the
square hole set up.
12.
Now reposition plates that were previously removed carefully over the holes and
insert socket screws and tighten.
13.
Next, reposition the transparent water holde , remembering to >>carry out<<
suitable tap connection and fix the container using the two black screws.
Summary of Contents for SUPREME DED400XP1
Page 1: ...EXPRESSO DED400XP1 ...
