Program manual
Euro-1000T
© Elcom Ltd.
44
Afterwards the information on conversion into the second stage of
Euro
currency is displayed. The same
information is also printed out.
During the second stage the actual EUR rate can be set in the programming mode by the following pro-
cedure:
O
actual rate
Y
[
Note 1:
All grandtotals will be deleted by moving into the second stage.
Note 2:
The conversion into the second stage is possible only after daily and periodical reports have been
executed. The return to the first stage is not possible without an ECR master reset. It is necessary
to call your service technician.
3.10.4 3rd stage of
Euro
currency
The basic currency is
Euro
, the supplementary currency is any foreign.
The customer can pay either in
Euro
or in any foreign currency.
Programming the third stage of
Euro
currency.
Switch the cash register to
P
mode:
4
J
and press the following keytops:
2
0
0
3
R
currency name
Y
EUR rate
Y
currency flag
Y
Currency name:
the abbreviation of a supplementary currency, max. 3 characters
EUR rate
:
the actual
Euro
currency rate to the national currency (entered to max. 11 digits).
max rate is 10 000
min. rate is 0,0001.
Currency flag:
1st digit - the number of decimal places to which the amount of supplementary
cur
rency is displayed
2nd digit - the number of decimal places to which the amount of supplementary
currency is rounded
Afterwards the information on conversion into the third stage of
Euro
currency is displayed. The same
information is also printed out.
During the third stage the supplementary currency rate can be set in the programming mode by the fol-
lowing procedure:
O
currency name
Y
EUR rate
Y
currency flag
Y
[
Note:
The return to the stage without
Euro
currency is not possible without ECR master reset. It is
necessary to call your service technician.