55
© Elcom Ltd.
Euro-2000TE Alpha Registration mode
4 Operation manual in registration mode
The functions that are described in the following chapters can be used in the Register mode. All financial
transactions are stored in this mode.
If the ECR allows you to use the training mode, you can try the following functions in the
training mode first (sales data are not stored in the memory).
4.1 Before you start a day
4.1.1 Recommended procedure for the manager at the beginning of the day
1. Check if there is enough paper on the roll in the printer for the day. Insert a new paper roll,
if necessary.
2. Print out the X report and make sure that date and time values are correct and that Z report
was executed.
3. Check whether there is enough cash in the drawer.
4. Register the initial cash put into the drawer by means of
O
(RA)
button.
4.2 Status and functions that are necessary to know before the
beginning of registration
4.2.1 Error warning -
H
button
(CLEAR)
In the event of incorrect use of a function key or by exceeding the registration range, the machine starts
an error beep. An error message appears on the display. To recover and correct the condition, simply press
the
H
(CLEAR) key. You will notice that the error code is cleared from the display. Enter correct function
or amount.
4.2.2 Cashier log in button
M
(PASSWORD)
The cash register allows the assigning of up to six secret identification numbers (passwords) for cashiers.
The cashier passwords as well as their names are programmed in the programming mode. If you want to use
the cashier identification, enter the numeric password and press the
M
button. For extra security, press the
M
button before the password entry. A notification of
PASSWORD
is displayed. The password numbers
entered are not visible on the display at this time. If an incorrect password is entered the register beeps
twice and remains locked. Enter the correct number and press the
M
button to unlock the register. The
password protection prevents unauthorized use of the cash register. If the cashiers name has been
programmed, the name will print in the receipt header area after the cashier log.
