background image

58

Registration mode

Euro-2000TE Alpha

               © Elcom Ltd.

4.4  Registration by means of departments

To get better information about particular revenue items split the articles into departments (article groups).

The expression of “department“ means articles grouped in the same category (dairy products, pastry,

alcohol etc.), or of the same tax level (VAT 6%, VAT 23% etc.). The Euro-2000TE ALPHA cash register

enables the use of a maximum of 8 departments and, if PLUs are used as sub departments, the number

increases up to 2400.
Item registration is completed by pressing the proper department button (DPT1-DPT8). After you press the

department button, the registered amount is added to revenue within the department. By pressing the

department button for the corresponding tax group, the maximum registration amount, preprogrammed price

and others parameters are assigned to the amount value. The sale information is stored in the register

memory and utilized for department reports.

Note:

By registration the numeric buttons 

0

,

1

,

 etc. and the department buttons 

;

-

B

 are used

(see the keyboard layout figure).

Print:

Step No.       Key operation

  

 1.

2700

 

;

   

2.

3120

 

<

   

3.

V

   

4.

W

B. Entries into departments utilizing a preprogrammed unit price.

Example: The preprogrammed unit price for DPT1 is 7,50 that for DPT2 is 43,20.

Step No.       Key operation

  

 1.

;

   

2.

<

   

3.

V

   

4.

W

Print:

4.4.1  Entries into departments

A. Entries into departments by entering the unit price.

DPT 1             

  I

1x7.50                     =7.50

DPT  2                         

  I

1x43.20                 =43.20

SUBTOTAL       50.70

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

TAXABLE VAT6%        50.70

VAT  6%

                    2.90

T

OTAL

                50.70

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

C

ASH

    50.70

DPT  1                         

  I

1

*

27.00                                =27.00

DPT  2                       

  I

1

*

31.20                                =31.20

SUBTOTAL      58.20

--------------------------------

TAXABLE VAT6%                       58.20

VAT  6%                                    3.30

VAT-TOTAL              3.30

T

OTAL

              58.20

-------------------------------

C

ASH              58.20

27.00

1xDEPARTMENT 1

Display:

Summary of Contents for Euro-2000TE Alpha









































































































Reviews: