ELCOM Euro-200TE User Manual Download

Page: 57 / 114

Programming manual

4. The display will then show the ID number of the programmable key, information label for the functi-

on programming „01.Function“ and text description of the current key function.

5. Press



(

ULTIPLY

) key to enter the key programming mode. The display will ask you to press a key.

By pressing a function key, you‘ll assign its value to the programmed key. Keep pressing to add fur-
ther function keys to the programmable sequence or press the currently progammed key to finish
programming and assign the programmed function sequence to that key. The cash register will
update the key definition and print the change information messages to both receipt and journal (this
information includes programmed key ID number, record type „01.Key“, info label on function pro-
gramming and its number „01.Function“ and the programmed function sequence). The cash register
then continues with programming of next key, or goes to the first key if the currently programmed key
was the last one.

6. If you didn‘t enter into the key programming mode, then you can press



(Subtotal) to confirm the

current value and proceed to the next key (or the first key if you were on the last key) and the pro-
gramming procedure continues again with step 1.

7. Press



(Total) button to exit the programming mode.

The key function deleting

You can delete function sequece assigned to a key if you press



(Clear) key during step 4. of the pro-

gramming procedure.
The display will show that you are about to delete the function sequence assigned to a key and awaits
a confirmation. Press



(Clear) key to delete the value or press



(Subtotal) to cancel the deletion. When

you cancel the deletion you can proceed with programming procedure as usual. If you decide to confirm
deletion, the cash register will delete the assigned function sequence assigned to that key and prints the
information about deleted function (this information includes programmed key ID number, record type „01.
Key“, info label on function programming and its number „01.Function“ and the keyword „deleted“). The
programming procedure then continues normally.

Printing of the programmed key name

The name of the programmed key will be printed if you press



(EAN) key during step 1 of the program-

ming procedure.
The cash register will print to both, receipt and journal following information on the key: ID number of the
programmed key, parameter label „Key name“ and current value of that parameter.

Printing of the programmed key function

The function of the programmed key will be printed if you press



(EAN) key during step 4 of the program-

ming procedure.
The cash register will print to both, receipt and journal following information about the key: ID number of the
programmed key and record type „01.Key“, parameter label „01.Function“ and text description of the current
key function.

Printing of the settings for all keys

You can print the settings for all the cash register key if you press



(Cheque) key in either step 1 or step

4 of the programming procedure.
The display will show „Keyboard prog.“ label and the same will be printed to both, receipt and journal. For
each key, the cash register will print:

•  ID number and record type: „01.Key“
•  parameter label „Key name“ and the name of the current key
•  for  each  function  in  the  current  key‘s  assigned  function  sequence  will  print  number  and  label

„1.Function“ and the current value of that function.