Euro 500TE Handy
© Elcom, s. r. o.
19
ECR programming manual
ECR programming manual
Before putting the cash register into operation,
it must be initialised. The cash register ini-
tialisation clears all programmed data. Warn-
ing: the cash register initialisation clears all
programmed data and sets the default values.
Grand Totals, the current number for reports
(Z1, Z2) and flag No. 1 values remain unaffect-
ed. Initialisation can be executed only if daily
and periodical reports were executed in the “Z”
mode.
Initialisation procedure:
1) Turn the cash register on by pressing the
button and switch it into the P mode by
pressing
4A
.
2) Press the
B
(
Credit
) button. The notifi-
cation
Memory clearing
appears on
the display.
3) To confirm the initialisation, press the
D
(
Subtotal
) button. The cash register
printer prints
Memory clearing
and ECR
will begin the initialisation.
4) The date and time are entered afterwards,
and then the printer prints
Clearing fin-
ished
and the initialisation is finished.
To initialise the ECR, you have to have the
electronic journal printed (along with daily
and periodical report).
Initialisation
12:03:38
PROGRAMMING MODE P
Memory clearing
PROGRAMMING MODE P
ENTER DATE
ENTER TIME
1200
Recommended programming procedure for Euro-500TE
The recommended programming procedure
contains this programming sequence that the
user is advised to follow: 1) system flags, 2) tax
levels, 3) electronic journal flags, 4) receipt logo,
5) cashiers, 6) function texts, 7) departments,
8) sale units, and 9) article items (PLUs).
Flags programming
Prior to programming, it is recommended
that this subchapter will be carefully studied
and clearly understood!
Note: If a key is used for two functions, choose
the function in a lower part of key by pressing
the key. To choose the function in the upper
part of a key, hold the
K
(
Shift
) key and
press the particular key.
Initial programming of system
flags
The system flags represent settings that have a
primary influence on the proper performance
of the cash register (number of decimal places,
rounding, date, time, etc.).
System flags programming procedure:
1) Switch the cash register into the P mode
by pressign
4A
. A notification “
PRO-
GRAMMING MODE P
” appears on the
