33
Programming manual
Sixth extended flag
Figure 3.14 Sixth extended flag values
Digit
Default setting
Meaning
Valid values
1
0
Look-up algorithm for PLUs when read 18-digits
long bar-code
0 – look-up using the entire bar-code,
1 – as option 0, but if look-up fails, the
bar-code is considered as EAN 13+5 and
extension is ignored
2
0
Look-up algorithm for PLUs when read 15-digits
long bar-code
0 – look-up using the entire bar-code,
1 – as option 0, but if look-up fails, the
bar-code is considered as EAN 13+2 and
extension is ignored
3
0
Printing format and storing format in the PC journal
if the cash register reads and successfully looks up
the 13+5 bar-code
0 – do not print and store anything,
1 – print and store only bar-code exten-
sion,
2 – print and store entire bar-code
4
0
Printing format and storing format in the PC journal
if the cash register reads and successfully looks up
the 13+2 bar-code
5
0
Printing format if the cash register reads and
successfully looks up bar-code with other
length than 15/18 or if a PLU has been read
using the PLU number that has length 15/18
and the cash register database contains the
same EAN code with given length (i. e. it is
not considered an EAN 13+2/13+5 code)
0 – do not print anything,
1 – print entire 18-digit long code
programmed for given PLU
Printing of the extended flag values
In the programming mode, select extended flags programming by pressing the
(
DISCOUNT
) but-
ton. After pressing the
(
CHECK
) button flags values will be printed. It is possible to print the value of the
particular flag only by pressing the
(
EAN
) button.
TAX RATES PROGRAMMING
The cash register allows the use of four tax rates. Both the tax rate and its name are programmable. Tax can
be programmed only after daily, monthly report.
Tax level programming procedure:
1) Switch the cash register into the programming mode “P” by pressing
.
2) Press the
(Refund) key. The display shows the number of programmed tax level and its rate.
1.
Momssats
25.00%
3) Enter the tax rate without decimal point. First two numerals compose integer part of the rate, last
two compose decimal part (i. e. for tax rate of 19% it is 1 9 0 0). The tax rate can be changed only
after daily and periodical report have been executed in “Z” report mode. If you need to disable
a specific tax level, programme its tax rate as 100.00% or higher.
Summary of Contents for Euro-500TE
