ELCOM Uniq Monitor 215, User Manual

MOUNTING VARIANTS OF THE UNIQ MONITOR 

Uniq Monitor is manufactured with a VESA mount.

VESA mount

VESA is a standardized method of attachment suitable for various devices. Thanks to its high prevalence and 

standardization there is a wide range of different stands available, that can be used in various environments 

in order to ensure easy access to connected devices. VESA mount itself does not allow to change the position 
of Uniq Monitor, all position adjustment options are dependent on a stand. 

VESA stands 

VESA stands are stands with standard screw attachment and are manufactured in various designs. They usually 

allow for adjustment of connected device’s position. Many types of VESA stands are suitable for placement of 

Uniq Monitor on moving supports (in vehicles), as they provide a solid connection between the support and 

Uniq Monitor. Furthermore, since the Uniq Monitor is bolted to the stand, it is to some extent also secured 

against unauthorized relocation off the range allowed by the stand.

Note :  Maximum length of screw’s threaded segment for VESA is 9 mm.

Figure 13.1.  Different VESA stand types

CARE

Prior to cleaning the device, always switch it off and disconnect it from the power source. For cleaning 

the external cover use a damp towel made of soft fibers. Do not use caustic cleaning agents or solvents as 

they can cause damage or discoloration of the cover’s plastic casing. For cleaning the surface of the display 

(the touch panel) use a dry cloth. If the display is very dirty, a apply small amount of a quality product for 

cleaning LCD displays on the dry dusting cloth. Never apply cleaning solutions directly onto the display. 

Speaker area can be cleaned using in similar manner using damp towel and if needed with small amount of 

the suitable cleaning agent. Uniq Monitor is secured against the ingress of water, but it may not be cleaned 

by immersion. Prevent the penetration of liquids to the inside of the device as they can cause damage to it. 

a) table stand 

                b) wall mount 

               c) wall mount double-arm

34

Mounting and care