27
en
DATA
NEW
Creates a new alpha numeric grid. You can customise the
grid file according to your requirements.
EDIT
Modify the parameters of grid files previously saved.
Note: Predefined coordinates cannot be changed once they
have been created.
OPEN
Recalls existing grids files from gauge memory.
DELETE ONE
GRID
Deletes a selected grid file from memory.
DELETE ALL
GRID
Deletes all files currently stored in memory.
UTIL
(UTILITIES)
AUTO
FIND
Automatically locates the detection point if the
measurement is out of the viewable display area.
SCAN MODE
Enables a high speed scan mode that increases the overall
sample rate from 24 to 50 measurements per second,
depending on the current measurement mode used.
ALARM
STATUS
Toggles alarm mode ON, OFF, or AUDIBLE.
ALARM HIGH
Sets the HI limit parameter. If the measurement exceeds
this value, a red light will illuminate and the alarm will
sound.
ALARM LOW
Sets the LOW limit parameter. If the measurement falls
below this value, a red light will illuminate and the alarm will
sound.
XFER
(TRANSFER)
BACKUP
SETUPS
Allows you to backup the setups currently stored in your
gauge to a computer via the RS232 port.
RESTORE
SETUPS
Allows you to restore setups saved on a computer to your
gauge via the RS232 port.
BACKUP GRID
Allows you to backup grids files stored in your gauge to a
computer via the RS232 port.
RESTORE
GRID
Allows you to restore grids files saved on a computer to
your gauge via the RS232 port.
ABOUT
Provides Elcometer NDT contact information and your
gauge software version.
Refer to the help section of your gauge NDT Link software
for a complete electronic manual covering data transfer.
Menu
Function
Description
