10
3.3
User Tag Voiding Instructions
Programming
function
User Action
Controller Response
User tag
voiding
1. Present the master
tag to the reader and
keep in the reader
field.
The controller responds with
a single beep. After a few
seconds, the controller
responds with an additional 3
beeps indicating that it has
entered user tag learn mode.
2. Press button S2
The controller responds with
3 beeps and after S2 is
released
is displayed. This indicates
that the controller has
antered user tag voiding
mode.
3. Press button S2 to
scroll to the user tag
number that has to
be voided from the
system.
Note: By holding
button S2 in the
scrolling speeed will
increase.
User tag that has to be
voided is displayed
e.g.3::
Summary of Contents for TRS06-01
Page 15: ...83024 GB 0410 ...
