FUSES
Replacement fuses must be made only with
fuses of equivalent values, and of the same
type as the originals. Correct values of each
fuse are clearly marked on them.
CAUTION
NEVER USE A FUSE OF HIGHER RATING
THAN THAT STATED.
REVERSE POLARITY
When connecting mains supply abroad, the
supply can be of reverse polarity. The
significance of this is that when equipment is
switched OFF it may not be electrically
isolated. The only certain way of making sure
equipment is safe is to unplug it.
There are several proprietary makes of
equipment to check the polarity of mains
supply. This equipment is useful, mostly for
mains connection when overseas.
If reverse polarity occurs on site then reverse
the live & neutral connections inside the plug
on your mains cable. Check before use.
If it can be achieved, it is preferable to connect
live to live, and neutral to neutral to maintain
full electrical protection.
GENERATORS
When using a generator to supply the P C.II
ensure that the actual output voltage does not
exceed the rated generator output voltage, and
the rated input voltage of the P.C.il, otherwise
internal damage to the P.C.11 unit could occur.
N.B. Refer to the manufacturer’s instruction
book before use.
CAUTION: Take care not to expose the battery
to sparks or naked flames as explosive gases
may be present.
N.B. As with mains supply, switch off all
appliances and lights before disconnecting the
battery.
CONTROL PANELS
Your Explorer Group motorhome will be fitted
with one of the following electrical control
panels.
20
CONNECTING SERVICES - ELECTRICITY
Summary of Contents for Autoquest 100 2004
