9-36
HOW TO USE YOUR MOTORHOME’S EQUIPMENT
Gain Adjustement
With the dB dial turned all the way clockwise,
amplifier sensitivity will be at maximum and it
is therefore able to receive the weakest
signals. If, instead, the signals are very
strong, there may be image overlap on the
TV screen. In this case rotate the dB dial
anticlockwise slowly until the image is
perfect.
Instructions for the Reception of
Horizontal or Vertical Polarity
Signals
This antenna can be positioned both
horizontally and vertically by simply turning
the knob at the bottom of the mast.
By turning the knob fully left-hand, the
antenna shifts to the horizontal position, by
turning it right-hand the antenna shifts to the
vertical position.
Fig 1
Fig 2
With battery power supply this switch (Fig
2) allows to switch off the AT42.
If the amplifier is connected to the 230V the
switch is not active.
Summary of Contents for encore
