5
EN
ELDES WIRELESS TOUCHPAD EWKB5
1 . GENERAL OPERATIONAL DESCRIPTION
DEVICE FEATURES:
• Arming and disarming
• Violated zone bypass and bypassed
zone activation
• PGM output control
• Customizable user-friendly graphical
menu
• Navigation through the menu using the
touch screen
• Multilingual voice-guided audio
instructions
• Adjustable brightness and volume level
• Battery or externally-powered
EWKB5 has 1 built-in zone terminal, which is by default designed for passive wired
digital sensor connection, such as magnetic door contact, and 2 tamper switches for
enclosure state supervision in case it is illegally opened or detached from the wall.
Regardless if the tamper switch alone is to be used, the zone must be enabled and the
resistor of 5,6k
Ω
nominal must be connected across Z1 and COM connectors (
illustrated
on page 4
).
It is possible to connect up to 2 EWKB5 devices to alarm systems. The
maximum wireless connection range is 1000m (~3281ft) (in open areas).
MAIN MENU FEATURES:
• Partition button – arms/disarms the system once a valid master/user code is entered;
indicates partition status (armed/disarmed),presence of system faults.
• Quick arm button – arms the system by touching and holding this button; master/
user code not required (customizable, hidden by default; not shown in picture).
• Fire – instantly causes fire alarm by pressing and holding this button (customizable,
hidden by default).
• Panic – instantly causes silent alarm by pressing and holding this button
(customizable, hidden by default).
• Controls – opens PGM output menu, thus letting you turn a certain PGM output ON or
OFF (customizable, hidden by default).
• Settings – grants access to settings menu once a valid master code is entered.
PITBULL PRO: 27
o
C
PITBULL
PRO
Panic
Fire
Controls
Settings
01:19
!
DIGITAL
CLOCK
LOW
BATTERY
LOW WIRELESS
SIGNAL
TEMPERATURE
PARTITION
BUTTON
EN
