Eldom G46, Operating Manual

- The appliance can be used after charging the battery.

- The shaver starts working after switching the switch (3)

- In order to turn off the appliance, the switch (3) should be switched again

- The appliance is equipped with an internal battery. Charging time is about 8 hours.

- In order to increase the battery life-span charging should be done in one uninterrupted 

  cycle after full discharging

- Power cable should be properly connected to the socket (5).

- Charge is indicated by a control light (4). The indicator light does not turn off when the 

  battery is charged.

- After charging, the appliance should be disconnected from the mains and the power 

  cord should be unplugged from the socket (5).

- The appliance is equipped with a trimmer (6) to cut beard , which is activated by the 

  switch (7).

OPERATING  MANUAL

ELECTRIC  SHAVER G46

GENERAL DESCRIPTION

1. Shaving head with three blades 

2. Opening button for 

    the shaving head housing

3. On/off switch

4. Indicator

5. Socket for the power cable

6. Trimmer

7. Trimmer opening button

TECHNICAL  DATA

HOW  TO  USE  THE  APPLIANCE

CLEANING  AND  PRESERVATION

- Before cleaning turn off the appliance and remove the power cable from the socket
- The whole appliance cannot be submersed in water
- After each shaving the blades chamber should be empty. In order to do it you must 

remove the shaving head housing by pressing button (2).  In order to clean the appliance 

the attached brush should be used.
- Do not use any cleansing agents which are strong and damage the surface
- Wipe the housing with a moistened cloth

- power: 3W

- mains voltage: 230V ~50Hz

- charging time: about 8h

- battery: Ni-Cd 600 mAh

1

2

4

5

3

7

6

7