1. On/Off switch
2. Locking nut
3. Body
4. Container for spices
5. Base
6. Plug
7. Thickness of grinding regulation
2
3
4
5
The grinder is intended for pepper grinding.
Grinding of other spices makes guarantee terminated.
Power supply
The grinder is powered with AAA alkaline batteries (1.5V).
To fix a battery:
- undo and remove a locking nut (2),
- twist the body gently (3) counterclockwise and pull it up,
- fix the batteries acc. to symbols on the container,
- place the body (3) and lock it twisting it clockwise
- fix the locking nut (2),
Used batteries should be thrown away the containers specially designed for this purpose.
Spice grinding
In order to pour a spice into the container twist the body gently (3) counterclockwise and
pull it up.
After pouring the spice fix the body (3) and lock it by twisting it clockwise.
Before commence of grinding remove the protective plug (6).
Grinder starts operation when the switch (1) is pushed and hold.
In the base of the appliance there is grinding thickness regulator (4) fig. 1.
To set a desired thickness of grinding twist the regulator (7) right into “+” or “-” symbol.
Do not change the grinding thickness when the grinder is operating.
Avoid humidity. Do not grind the pepper directly over evaporating plates since humidity
may cause clogging of the appliance and damages to the drive.
1
ELECTRIC PEPPER MILL MP7
8
6
7
photo 1
photo 2
User’s Manual for
GENERAL DESCRIPTION
TECHNICAL DATA
OPERATING
- power supply: AAA batteries, 4 pcs.
Batteries do not pose the grinder’s equipment
