3
1
11
10
9
2
4
5
6
7
8
Operating instruction
JUICE EXTRACTOR SK9S
General description
Technical data
1. Pusher
2. Feeding tuble
3. Lid
4. Filter
5. Juicer collector
6. Juice spout
7. Pulp container
8. Control knob
9. Safety clamp
10. Juice jug
11. Juice jug lid
- power: 700W
- mains voltage: 230V ~ 50Hz
- maximum time of continuous
operation: 3 minutes
- break before continuation
of operation: 5 minutes
HOW TO USE THE APPLIANCE
Your new juicer has a special, slightly tilted design that leans
5° to the side of the juice outflow opening
to ensure maximum juice output.
Snap the safety clamp onto the lid to lock it into place (‘click’) and slide the pusher into the feeding tube by
aligning the groove in the pusher with the small protrusion on the inside of the feeding tube.
Make sure the safety clamps are locked into the position on either side of the lid.
Place the juice jug under the spout.
Read these instructions for use carefully before using the appliance
- wash all detachable parts,
- assemble the appliance
MONTAGE
Place the juice collector into the appliance and place the pulp
container into the appliance by tilting it forwards slightly.
Insert the top end first and then push home the buttom end
Put the filter in the juice collector and hold the lid over the filter and
lower it into position
8
