7
SAFETY INSTRUCTIONS
Please acquaint precisely with whole of this instruction
before using the blender for the first time.
1. Connect the appliance only to a suitably earthed
socket compatible with theparameters indicated in the
instructions
2. To protect against electrical shock, do not immerse cord,
plug or appliance itself in water or other liquids.
3. Do not use outdoors
4. Do not touch hot surfaces. Use handles or knobs.
5. Close supervision is necessary when appliance is used by
or near children.
6. Make sure you observe the maximum time of continuous
operation of the appliance. Exceeding the time limit and
failing to provide appropriate breaks during the operation
of the appliance may cause irreparable damage to the
engine.
7. Do not place any of the following materials inside the
unit: Paper, cardboard, plastic and the like.
8. Do not turn the device on when the container is not
properly placed on the casing of the engine or when the
lid with measure iss not properly placed.
9. Always place your hand on top of the blender when you
are operating the device
10. Before taking the container out from the casing of
the engine or before raising the lid, turn the device off
(switch in the position “0”) and wait until the blade will
completely stop. Unplug from outlet when not in use and
before cleaning. Allow to cool before putting on or taking
off parts.
11. Do not let cord hang over edge of table or counter or
touch hot surfaces.
12. Oversized foods or metal utensils must not be inserted in
the appliance as they may cause a fire or risk of electrical
shock.
