Centrifuge Extractor 1500, Centrifuge Extractor 3000
45-3810, 45-3815
6
9907X0071 Issue 2
3.2.6 Three fasteners (10) are provided to retain the top cover (11) in position during the
centrifuge process.
3.2.7 The cover incorporates a bearing that engages with the end of the drive shaft (4) to
minimize vibration. It also provides a means of adding solvent as specified during the
centrifuge process (14).
4 Safety
Warnings!
Do not operate without the cover correctly positioned and locked.
Do not remove the cover while the bowl is rotating.
If excessive vibration occurs, switch off and check for distribution of the test
specimen in the bowl.
Use only in a well ventilated location.
5 Installation
5.1 Location
5.1.1 The apparatus can be mounted on any solid bench that will support the weight and
remain firm during the centrifuging process.
5.1.2 The apparatus can alternatively be secured directly to the bench by removing the four
feet and screwing through the bench top (Figure 3).
Figure 3 View on underside of centrifuge showing fixing hole centres
5.2 Collection of extract
5.2.1 To assist with the disposal or collection of the solvent / bitumen solution, place the
plastic extension tube over the drain tube protruding from the side of the bowl cover.
