pH/mV Temperature Meter
430-020
11 9907X0088 Issue 2
DO NOT
touch the sensitive glass pH membrane or reference junction.
Excess droplets of solution may be removed by gently blotting with filter
paper or tissue.
DO NOT
rub the electrode as this may induce an electrostatic charge.
During use ensure the electrode is rinsed between each measurement to
eliminate the contamination of solutions.
6.1 Battery Replacement
Replace the battery when the battery icon is low.
This meter will continue to measure accurately but after further usage the
meter will display ‘FLAt bAT’ and shutdown.
Unscrew the screws on the back of the meter and replace with three AAA
batteries ensuring that the polarities are correct.
7
Spare Parts
Part Code
Description of Spare Part
430-020/10
Epoxy bodied electrode
430-020/12
Temperature probe
8
Service and Support
8.1 Service
Our dedicated service staff are on hand to help in the unlikely event that your
equipment develops a fault. Please contact them by one of the following
means with a clear description of the problem:
E-mail:
ele@eleint.co.uk
Tel:
+44 (0) 1525 249200
Fax:
+44 (0) 1525 249249
On occasion it may be necessary for your equipment to be sent back to our
Service Department for repair. In this case please contact the Service
Department for a reference number which you should include with your faulty
equipment. Please also ensure you include a clear description of the fault.
