background image

 

 

IMPORTANT SAFEGUARDS   

When using Electrical appliance, basic safety precautions should always be followed including 
the following. 

1. Read all instructions before use.   
2.

 DO NOT touch the hot surfaces. Use handles and knobs. 

3. Use unit only on a level surface. 
4. Use only with induction-compatible cookware. 
5. Dry outside of the pan before use. 
6. Do not heat empty pan. 
7. Do not spill any liquids into vent areas. 
8. TO protect against electrical shock, do not immerse cord, plugs or housing unit in water or 
other liquids. 
9. This appliance should not be used by or near children or individuals with certain disabilities. 
10. Do not leave appliance unattended when it is on. 
11. Unplug from wall outlet when not in use and before cleaning. 
12.  Do  not  operate  any  appliance  with  a  damaged  cord  or  plug,  after  the  appliance 
malfunctions  or  has  been  damaged  in  any  manner.  Call  the  toll-free  NO.  to  return  for 
examination, repair or adjustment. 
13.  The  use  of  accessory  attachments  not  recommended  by  the  appliance  manufacturer  may 
cause injuries. 
14. Do not use outdoors or while standing in a damp area, 
15. Do not let cord hang over the edge of the table or counter, or touch hot surface 
16. Do not place on or near a hot gas or electric burner, or in a heated oven. 
17. Extreme caution must be used when moving any pot or pan containing hot oil or other hot 
liquids from this appliance. 
18. When using this appliance proved at least 4-6 inches of air space above and on all sides for 
air circulation. 
19.  Do  not  use  this  appliance  for  any  other  than  its  intended  use.  This  appliance  is  for 
household use only. 
20. To disconnect, turn the unit off, then remove plug from wall outlet. 
21.  Do  Not  Cooks  on  Broken  Cook  Top-If  cook-top  should  break,  cleaning  solutions  and 
spillovers may penetrate the broken cook-top and create a risk of electric shock 
22.  Clean  Cook-Top  with  caution,  -If  a  wet  sponge  or  cloth  is  used  to  wipe  spills  on  a  hot 
cooking area, be careful to avoid steam burn, some cleaners can produce noxious if applied to a 
hot surface. 

23. Save these instructions. 

SAVE THESE INSTRUCTIONS!

 

 
 
 
 

 

Summary of Contents for 780-2402








Reviews: