13
14
2. When pressing any of the 6 pre-programmed buttons, its corresponding
icon will flash as the picture shows.
BEFORE THE FIRST USE
1. Remove all packaging from the air fryer, including stickers.
2. Pull the basket handle to remove the baskets (Figure 1).
3. Press the basket release button to separate the inner basket from the outer
basket (Figure 2) :
• Separate baskets only after cooking, before serving food or wash.
• The button guard protects the release button from being pressed
accidentally. Uncover the button guard and press the release button
to separate the baskets.
• Never press the release button while carrying the baskets to avoid
dropping down.
• Only press the release button with the baskets resting flat on a counter
(or any level, heat-resistant surface).
• The handle is attached to the inner basket instead of the outer basket,
therefore when you press the release button, the outer basket will drop
down.
4. Use either a dishwasher or a non-abrasive sponge to wash both baskets.
5. Wipe the inside and outside of the air fryer with a slightly moist cloth, then
dry it with a clean towel.
6. Place the fan on the bottom bearing of outer basket (Figure 3).
7. Place the baskets back inside the air fryer.
8. Place the air fryer on a stable, level, heat-resistant surface, away from
areas that can be damaged by steam (such as walls or cupboards).
9. Leave 5 inches (13 cm) of space behind and above the air fryer and also
leave enough room to remove the baskets (Figure 4).
NOTE
: To order replacement parts, please contact Customer Service Team of
Elechomes.
Figure 1
Figure 3
Figure 2
Figure 4
5 inches (13 cm)
5 inches (13 cm)
