Page 10 of 12
3.
4.
1.
2.
a.
b.
c.
d.
Once you have your MEID, you can call your provider and activate the RediGate
Testing Connectivity – Ping Utility
The easiest way to test RediGate network connectivity is by using the ping tool built-in to the RediGate diagnostics:
Connect to the RediGate using Putty
Enter the following commands
3 – Diagnostics Services
14 – Ping Service
(IP address or domain of Host destination — 8.8.8.8 or google.com for example for internet connected devices)
If you see a reply from the IP address you pinged, you are connected and ready to send data from your field device to your host
platform
Downloading and Installing Software Updates
