Electra Roller, How To Install

11

Adjusting the upper & lower stop positions

2. Press and hold the
Up and Down buttons
until the blind jiggles.

3. Adjust to the desired
upper/lower stop
position using either
the Up or Down button.

4. Press and hold the 'my'

button until the blind
jiggles.

1a.  Adjust  upper stop position 
- press the up button and send
the blind to the current upper
stop position.

1b.  Adjust  lower  stop position  - 
press the down button and send 
the blind to the current lower stop 
position.

Setting

Use either Up or Down to operate the blind and press 'my' to stop 

at the desired intermediate position. 

Once the desired intermediate position is reached, press and hold 
the 'my' button until the blind jiggles (approx 5 secs). The 'my' 
position has now been set.

Using the 'my' position
Send the blind to the 'my' position by pressing 
'my' from ANY position (the blind must be 
stationary prior to activating the 'my' position 
function).

Delete the ‘my’ position
Send the blind to the 'my' position, then press 
and hold 'my' until the blind jiggles (approx. 5 
secs). The 'my' position has now been deleted.

Using the ‘my’ position (intermediate position)

The 'my' position is a memorised intermediate position between the 

upper and lower stop positions. You can set this anywhere you want and 

send the blind to it at the touch of the 'my' button.