9
MaInTenanCe
WarnInG
Disconnect power before attempting any maintenance or cleaning to
reduce the risk of fire, electric shock or damage to persons.
lIGHT BUlB rePlaCeMenT
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to
avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of the
flame or when the clarity and detail of the log exterior disappears. There
are two bulbs under the log set which generate the flames and embers.
HelPFUl HInTs
It is a good idea to replace all light bulbs at one time if they are close to
the end of their rated life. Group replacement will reduce the number of
times you need to open the unit to replace light bulbs.
BUlB reQUIreMenTs
Quantity of 2 clear chandelier or candelabra bulbs with an J-12 (small)
socket base, 60 watt rating. Example GE 60BC or Philips 60 CTC.
TO rePlaCe THe lIGHT BUlBs
1. Unplug the unit from power outlet.
2. On the back of the Compact Fireplace remove the screws from the
light access cover. (FIGURE 10)
3. Remove the light access cover.
4. Reach into the opening, locate and examine the bulbs to determine
which bulb(s) require replacement.
5. Unscrew the bulb(s) counter clockwise.
6. Insert new bulb(s).
7. Install the light access cover and install the screws.
www.sylvane.com 1-800-934-9194
