13
BULB REPLACEMENT
The bulb must be replaced by the manufacturer, its service agent or similarly
qualified persons.
Always switch off the electricity supply before carrying out any operations on the
appliance. When handling the bulb, make sure it has completely cooled down before
making contact with the hands.
When handling bulbs hold with a cloth or gloves to ensure perspiration does not
come in contact with the bulb as this can reduce the life of the bulb.
1. Remove the grease filter.
2. Put one hand into the cavity to gently push out the LED light, and use the other
hand to support the light and pull it out, then pull out the light cable.
3. After changing the lamp, plug in the lamp cable, and return the lamp into the
lamp holder.
The ILCOS D code for this lamp is:
DSS-1.5-S-33.2/120
LED Modules
Round lamp
Max wattage
2 x 1.5 W
Voltage
DC 12V
