7 of 14
Power Connection
Connect the USB charger to the USB port (21) on the camera holder. Connect
the other end to the 12V outlet (e.g. cigarette lighter) in your vehicle. The
camera will power on automatically once the 12V outlet is turned on.
Note: There are 2 Mini USB ports on the device. One on the camera holder
and one on the camera. If you connect the power to the one on the device,
only the device will be powered. If you connect the power to the one on the
camera holder, both the camera and GPS module will be powered.
G-Sensor Function
In the event of a collision the Gravity Sensor (G Sensor) will record the
direction and data associated with that collision. The sensitivity of the G
Sensor can be set to activate the protection function for the current video file.
This will stop the file being over written in the event of a collision. The
sensitivity can be altered in the settings menu, the higher the value the more
sensitive the G Sensor will be.
Video Mode
When the device is powered on it will default to recording mode and the
screen will display as below:
The video mode icon will be a blinking red dot to indicate that the camera is
recording.