9
BULB REPLACEMENT
Note:
•
Before changing the lights, make sure that the appliance is turned off and
unplugged.
•
Protect against danger when changing lights, such as wearing gloves.
Changing the light
1. Remove the decorative board and aluminum mesh, remove the two screws of the
fixed lamp board with a screwdriver.
2. Unscrew the 4pcs screws on the LED light strip bracket by cross screwdriver,
dismantle the LED light strip and pull out the terminal of the light connecting wire.
3. Apply the reverse procedure to reinstall the light strip.
For model 60CM:
• ILCOS D code for this lamp is: DSL-4-S-350
– LED modules –LED lamp strip
– Max wattage: 1×4 W
– Voltage range: DC 12V
– Dimensions: 350mm
For model 90CM:
• ILCOS D code for this lamp is: DSL-5-S-450
– LED modules –LED lamp strip
– Max wattage: 1×5 W
– Voltage range: DC 12V
– Dimensions: 450mm
