10
CARBON FILTER (OPTIONAL)
Activated carbon filters can be used to trap odours (optional)
– and must be used if the hood is
not vented to the outside. They are available from the same stockist you purchased the hood
from.
Part Number: eiQTMCARBONCHIM (Carbon Filter Pack of 2)
In order to install the activated carbon filter, the metallic anti-grease filter should be detached
first. Press the lock and pull it downward.
Put the activated carbon filter into the unit, fix it by
turning it clockwise at each end of the motor (see
diagram below)
NOTE:
•
Make sure the filter is securely locked. Otherwise, it could loosen and cause damage to
the unit.
•
When the activated carbon filters are attached, the suction power will be lowered.
•
The charcoal filters cannot be washed or recycled. They should be changed at three to
six month intervals depending on the amount of use the hood receives. Replacements
are available from the stockist you purchased the hood from.
eiQTMCARBONCHIM (Carbon Filter Pack of 2
– fits both 60cm and 90cm models)
