9
10. Put the chimney onto the cooker hood. Attach plate II onto the outer chimney. Lift the
inner chimney to the desired height, and attach plate I onto it.
There are two methods for attaching the plates to the chimney after the plates have been
attached to the wall.
a. Fix the plates to the wall using two screws (4mm x 30mm) and wall plugs. Hang the
chimney on the plates using the hooks in the side of the chimney. (Pic 1)
b. Fix the plates to the wall using two screws (4mm x 30mm) and wall plugs. Attach
the chimney to the bracket using a screw at either side (Pic 2)
11. Fix the lower chimney on the cooker hood by 2
screws (4x8mm)
12. Before usage, read all the instructions and make sure that the voltage (V) and the
frequency (Hz) indicated on the identification plate (found inside the cooker hood) and all
the data inside the appliance are exactly the same as the voltage and frequency in your
home. Then plug the power lead into the power socket (or if connecting directly to the
mains via a switched spur, ensure the work is carried out by a competent, qualified person)
and the cooker hood is then ready for use.
