10
6. Place the glass canopy on to the
hood, aligning the screw holes.
Place the anti-vibration rings into
the 4 holes before securing the
glass canopy into place by
tightening the 4 bolts (M4*20)
through the mounting rings into
the hood.
7. Then
fix the outlet on the hood
and
attach the adaptor
.
8.
Hang the hood on the wall in the desired
final position.
9.
Once the hood is positioned
correctly, fix the unit to the wall
using 2 x ST4*30 screws and wall
plugs through the fixing holes.
The fixing holes are located inside
the unit behind the grease filters.
10. Place the two chimneys together
onto the cooker hood body. Adjust
the height of the inner chimney
until a suitable height. Fix the inner
chimney to the chimney bracket
using the supplied screws
(ST4*
8
).
Summary of Contents for eiQCURV60EN
Page 18: ...18 PRODUCT FICHE eiQCURV60EN ENBL...
Page 19: ...19 eiQCURV90EN ENBL...
