5
PRODUCT OVERVIEW
ASSEMBLY
Important: Ensure that the supply cable is well mounted and that it does not come
into contact with the heater or that does not trail into heated area.
1. This heater should be installed by a competent person, i.e. a qualified
electrician.
2. Always disconnect the heater from the electricity supply and allow it to cool
before installation.
3. The supply cable must be at the lower end of the heater if the heater is
installed at an angle or vertically.
4. Keep the supply cord away from the body of the heater which will get hot
during use. Do not install the heater on an inflammable surface.
5. Observe the minimum safe distance between the heater body and the
inflammable surfaces when mounted.
6. If the heater is to be used outside, a weatherproof outlet is needed.
7. Before drilling ensure that there are no wires or water pipes in the area where
the heater is to be installed.
8. The heater must be installed on the mounting chain provided.
9. Fasten the chain securely to the mounting surface. Fasten the heater securely
on the chain.
Carabiner
Chain
Carabiner
Main Body
Remote Control
