6
PATIO HEATER ASSEMBLY
Required Tools: Philip Screwdriver / Adjustable Spanners / Wrenches
Leak Detection Solution: one-part detergent and three parts water
Assemble all nuts and bolts loosely at first. Tighten all connections after completion of assembly. This eases your work
and increases the stability of your appliance.
Before assembly, make sure all packing material and any transmit protection must be moved.
Small deviations in equipment may occur. This is no lack of quality but subject to improvements.
1.
Fix the post (G) onto the top of wicker tank
housing assembly (F) by using 4pcs hexagon
bolts M6x40, 4pcs M6 nut, and 4pcs φ6 washers.
2.
Place the wicker table (E) onto the top of wicker
tank housing assembly (F) by getting through the
post (G). Then cover the desk ring (D).
3. Install the Wheel kits(H) onto the base by using
2pcs wheel-gaskets,2pcs long shaft sleeve,2pcs
hexagon bolts M8x85, 4pcs flat washers
φ8 and
2pcs hexagon lock nuts
