11
CARBON FILTER
(Available Separately
)
Activated carbon filters can be used to trap odours, and must be used if the
unit is not vented externally. These are available from the same stockist the
hood was purchased from under reference:
eIQTMCARBONCURV Carbon
CARBON FILTER INSTALLATION
In order to install the activated
carbon filters, the aluminium
grease filter should be removed
first. Press the lock and pull it
downward as below:
Put the activated carbon filter
onto the end of the motor unit
and turn it in clockwise direction.
Repeat the same on the other
side (see diagram)
NOTE:
• Make sure the filter is securely locked. Otherwise, it could loosen and
cause damage to the unit.
• When the activated carbon filters are attached, the suction power will
be reduced..
• The charcoal filter cannot be washed or recycled. It should be changed
at three or six month intervals, depending on the amount of use the
hood receives. Replacements are available from the stockist you
purchased the hood from.