Electrix Repeater Manual Download | Manualshive

Page: 23 / 48

background image

P L AY

In Play mode, Repeater plays back the contents of a recorded loop at the selected tempo, and the green LEDs of the

Play

button are illuminated (seems obvious, but you never knowÉ). In addition, the

Slip

,

Pan

, and

Pitch

controls

are available and can be tweaked. If these controls are used, they will take over the nor-
mal play display.

Play mode can be entered in several ways. The conditions and meaning of these differ-
ent entry modes are discussed below. Oooh! Wait till you read thisÉ

From Stop

Pressing

Play

while the unit is in the stop state will instantly trigger the loop from

the start. If the current loop is an empty loop, the play button is inactive.

From Record

If the unit is in the record state and

Play

is pressed, the recording will be com-

pleted and playback will start if itÕs an initial record or continue if itÕs an overdub.

From Play

Pressing

Play

when the unit is in the play state/ Pressing

Play

when the unit is in

the play state has the effect of continuing the play operation but immediately
moving back to the start of the loop. (Get it?)

From a Cued Loop

Pressing

Play

when a new loop is being cued will engage the auto loop transition.

pressing play again will engage the new loop immediately.

R E C O R D

Recording mixes the audio from the input with selected tracks to produce a new track (or stereo pair of tracks). The
display shows the current bar and beat counting down and the

Record

button LEDs will light. Additionally, while

the undo function is available, the

Erase/UNDO

button is lit.

During recording, it is legal to operate the

Slip

,

Pan

and

Pitch

controls. (You may also dance, but only if legal in

your current location.)

The special case of recording is the 'Initial' recording, which is defined as recording to a track in a loop that currently
contains no data. In this special case, the loop length is set by the length of this initial recording.

Recording Limitations

Record is always immediately available, but may not be possible to com-
plete due to memory constraints. In the case that record is triggered when
memory is full, the word '

' will flash in the memory/play time win-

dow for 3 seconds. A

Track Select

button (or a stereo-linked pair of

Track Select

buttons) will always be lit. This is the active track for

recording. By default/initially, Track 1 will be selected and so the Track 1
select button LEDs will be lit.

English...

23

THE TRANSPORT

Memory Full Display

Playing with Loop

Triggering

Repeater's transport has some
unique features that make it

very playable in a performance

setting. Every time you press

Play

the loop is restarted

from the beginning. This is

great for re-triggering or
changing up the feel of loops

on the fly. Additionally you
can press and hold

Stop

and momentarily trigger the
loop by pressing

Play

. The

loop will only play for as long
as you hold down

Stop

and

Play

together. This is

great for stuttering FX and
sample hits and shots.

«
...
21
22
23
24
25
...
»

Summary of Contents for Repeater

















































Reviews:

No comments

Related manuals for Repeater

Brand: Vandlion Pages: 22

Brand: Hama Pages: 14

Brand: Daewoo Pages: 41

Brand: Daewoo Pages: 64

Brand: ARISTONA Pages: 72

Pocket Memo LFH9375

Brand: Philips Pages: 2

PocketMemo DPM7200

Brand: Philips Pages: 2

Pocket Memo DPM8200

Brand: Philips Pages: 2

Pocket Memo LFH9399

Brand: Philips Pages: 3

Brand: Philips Pages: 2

Pocket Memo LFH588

Brand: Philips Pages: 40

Brand: RCA Pages: 2

Brand: RCA Pages: 20

Brand: eCorder Pages: 9

Brand: Paso Pages: 12

Brand: Belkin Pages: 1

Brand: Olympus Pages: 136

Brand: Olympus Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands