Electrix Repeater Manual Download | Manualshive

Page: 33 / 48

background image

SHARING FILES WITH YOUR PC

Here's how to get the loops you've created with Repeater onto your PC for back up or for loading into your favorite
PC based audio application. First you're going to need a USB Compact Flash Reader. Check out the SanDisk
ImageMate, (http://www.sandisk.com/cons/imagemate.htm). Get the CFC reader working and plug in a CFC with
Repeater data on it. Repeater organizes its data in convenient folders. The folders are named just like the loop, i.e.
"Loop001". Inside the folder are nine files. Four (4) of these files labeled: "track1.wavÉ. track4.wav", are the content
from each track in the standard .WAV file format. The other five (5) files are proprietary Repeater files that contain
track and loop information. If you have pitch shifted or time-stretched to a new tempo you will need to re-sample
each track before exporting to capture those effects. Repeater records extra data at the start and end of each loop to
facilitate trimming. If you want your exact loop in the .wav file you will have to erase that extra data. You can do this
on Repeater by pressing and holding the

Trim

button until the display reads "

".

Organizing Loops

You can re-organize the order of loops in Repeater simply by renaming the folders. Be careful to keep Repeater's
naming convention, otherwise Repeater may not be able to find your loops even though they remain on the card.
When copying Loop folders, insure that they contain all of the proprietary Repeater files along with the .WAV
files.

Exporting Loops From Repeater

The .WAV file format has provision for region marks. Repeater uses the
region marks to identify the start and end point of the loop. Most audio
applications will support and indicate the region marks in their editor win-
dows.

English...

33

Bounce Tracks & Commit External FX & Pitch Shift (Flatten the loop)

Pitch shifting and FX applied on tracks are completely non-destructive in that they do not permanently affect the recorded audio. If
you wish to record the effects to memory, you can re-sample the tracks.

To Bounce Tracks with (or without) EffectsÉ

¥ Set the LEVELS, PAN, PITCH and FX Insert just how you want it to sound for the new resampled track.

¥ Select the track(s) you wish to resample to. Press

Resample

¥ Use the

Track Select

buttons, select the tracks you wish to be mixed into the resampled tracks. Press

Resample

again

to confirm

¥ Now press

Record

to engage the resample. Repeater will stay in Record and play until you press

Record

again. If you

press

Record

before an entire loop cycle is completed then the record light will begin to flash. DonÕt panic. Resample needs to

record through one entire loop cycle . When the Resample operation is complete the flashing CFC light will stop and youÕre done.
Pressing the

Record

button before the loop is finished is a good way to automate the resampling of a single loop cycle.

¥ You may adjust the mix or any other parameter during the resampling operation.

FILE MANAGEMENT

«
...
31
32
33
34
35
...
»

Summary of Contents for Repeater

















































Reviews:

No comments

Related manuals for Repeater

Brand: Olympus Pages: 196

Brand: Coby Pages: 48

ICD P620 - 512 MB Digital Voice Recorder

Brand: Sony Pages: 56

Brand: Sound Devices Pages: 8

Brand: Magnavox Pages: 98

Brand: Continental Refrigerator Pages: 12

Brand: RECORDER GEAR Pages: 15

Brand: ABB Pages: 2

Brand: TANDBERG Pages: 8

Brand: Magnavox Pages: 59

Brand: youview Pages: 10

Brand: Magnavox Pages: 128

Brand: Olympus Pages: 175

Brand: Wintal Pages: 40

Brand: JVC Pages: 18

Brand: The Singing Machine Pages: 4

EDIC-mini Tiny16 B43

Brand: TS-market Pages: 8

EDIC-mini Tiny xD B68

Brand: TS-market Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands