33
© 2006, Elektro-Automatik GmbH & Co. KG
EN
Safety instructions
Dangerous voltage
Caution:
The output voltage can rise to dangerous levels
(> 60 VDC)!
All live parts have to be covered. Make sure, that the cover is
installed over the output terminals before taking the unit into
operation. All actions at the output terminals have to be done
while the unit is switched off from the mains (mains switch
OFF) and may only be executed by personnel which is
instructed about the hazards of electrical current. Any
connection between the load and the unit (at the output
terminals) have to be scoop-proof. Applications connected
to the power output must be configured and fused in a way
that prevents the use of these to cause a damage or worse
to the unit by overload or malfunction.
Important! Keep in mind!
•
Only operate the unit at the voltage stipulated on the type
plate
•
Never insert mechanical parts, especially from metal, into
the unit, there is risk of an electrical shock and the unit
might get damaged
•
Avoid the use or presence of liquids in the proximity of the
unit, the liquid might get into the unit and cause damage
•
Never touch the contacts of the mains plug at the mains
cord directly after unplugging it from the mains socket,
because there is risk of an electrical shock
•
Never connect loads, especially ones with low resistance,
to the unit while the power output is switched on, because it
can cause sparks which might damage the unit and injure
the hands
•
In order to equip interface cards into the slots at the rear
side,
the common ESD regulations have to be followed
•
The interface cards may only be plugged and unplugged
while the unit is completely switched off (mains switch OFF)
General
About & Copyright
User instruction manual for power supply series PSI 9000
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +(49) 02162 / 37850
Fax: +(49) 02162 / 16230
Web: www.elektroautomatik.de
Mail: info@elektroautomatik.de
© 2006 Elektro-Automatik
Reprint, duplication or partly, wrong use of this user instruction
manual are prohibited and might be followed by legal
consequences.
Date: Februar 2007