EDA-Z5008, Z5020 & Z5100 – User Manual
ZPControlUserMan_r100
_____________________________________________________________________________________________________
6
1.0 - Front Panel Layout
①
Fire LEDs
If the panel goes into alarm, these LEDs will flash until the panel is reset.
②
Zone Alarm LEDs
In a fire condition, the appropriate zone LED will illuminate. If the fire
condition exists across multiple zones, multiple zone LEDs will be
illuminated. The zone LEDs will remain lit until the panel is reset. *
The
EDA-Z5008 8 Zone panel is shown. The EDA-Z5020 panel is equipped with
20 zone LEDs and the EDA-Z5100 is equipped with 100 zone LEDs.
③
Status LEDs
Supply
This LED will be illuminated when mains power is present.
Delays Active
Illuminated if delays are enabled.
Disablements
Illuminated for any disablement.
Test Mode
Illuminated if any test modes are operational.
More Info
More information on the system condition is available in the event log.
Example image
①
②
③
④
⑤
⑥
