ELECTRO FREEZE Soft Serve Model 30T-RMT
184952
35
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
11 Routine Maintenance
(continued)
MONTHLY
CAUTION
Make sure system is
depressurized before
proceeding.
— continued
A. Test Head Switch.
The head switch feature is designed to
prevent the beater shaft from being acciden-
tally activated. It is essential that the proper
operation of this switch be verified on a
routine basis. Use the following instructions
to test for proper operation:
1. Be sure all switches are in the
“OFF” position.
2. Disconnect the main power supply.
3. Remove the dispense head and
beater shaft assemblies.
4. Connect the main power supply.
CAUTION
Moving parts. DO NOT place
hands in the freezing cylinder.
Severe personal injury could
result.
5. Turn the selector switch to the
“CLEAN” position.
6. Look inside the freezing cylinder
toward the rear—the drive shaft coupling
should
NOT
be turning. Turn the switch off
and disconnect the main power supply.
7. If the drive shaft coupling is turning,
or you are unable to determine whether or
not the shaft is turning, turn the switch to the
“OFF” position, disconnect the main power
supply and contact your Electro Freeze
distributor for service.
DO NOT
place the
freezer in service until the problem has been
fixed.
B. Water Condenser.
Check the outlet water temperature of water-
cooled condensers at the floor drain. Ideal
water temperatures should be about 95°F
(35°C) with a 70°F (21.1°C) water inlet tempera-
ture.
C. Test MTS Cover Switch.
The MTS cover switch feature is designed to
prevent the MTS gear motor from being acci-
dentally activated. It is essential that the proper
operation of this switch be verified on a routine
basis. Use the following instructions to test for
proper operation:
Note: Freezer should be cleaned and disas-
sembled for this test.
1. Be sure all switches are in the “OFF”
position.
2. Remove the MTS cover to expose the
roller assembly.
3. Turn MTS switch to “ON”.
CAUTION
DO NOT place hands near
the MTS rollers. Severe
personal injury could
result.