ELECTRO FREEZE Model FM8
184979-17
21
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1. In areas where state and local
health codes allow, the freezer may be
switched to the energy saving “NIGHT”
mode operation. This will allow the
freezer to cycle less at night, but still
maintain approximately 5°C, or lower,
product in the cylinder and hopper.
2. To switch the freezer to the
“NIGHT” mode, leave the Selector
Switch in the “AUTO” position and place
the Day/Night Switch in the “NIGHT”
position.
3. The plunger rod must be in place
for the unit to operate in the “NIGHT”
mode.
4. Remove nozzle, and clean all
soiled surfaces with soap and water.
5. Using the small brush supplied
in the spare parts kit, brush the nozzle
and bottom of the plunger, and then
wash with sanitizer solution.
6. Turn the mix feed insert to the
“CLOSED” position, as shown in figure
10-1.
7. Check mix level in hopper to
ensure there is enough mix to keep the
indicator light off; add mix if necessary.
Do not dispense product when the
mix feed insert is in the “CLOSED”
position.
8. To start the machine after using
the “NIGHT” mode, place back to “DAY”
mode and replace the sanitized nozzle.
9. “OPEN” the mix feed insert and
fill the hopper with mix (figure 10-1)
.
10 Closing Procedures
10.1 Night Switch Operation
Look through top hole in
tube — you should see
clear through.
Look through top hole in
tube — you should see
the inner white plastic
tube (regulator) blocking
the opening.
Figure 10-1 Mix Feed Tube
Positions
Closed — night operation