Doc
#
E149704 V.1.08
QS - 8
Shark® 200T Quickstart
Electro
Industries/GaugeTech
™
Powered by Innovation™
2. Input a new meter designation into the
field. Note that it is important to name
each meter individually, since the meter
name is used to name the log databases
when logs are downloaded.
See Chapter 8 in the software manual
for an explanation of the other settings
in this screen.
IMPORTANT!
When you have made
changes to the meter’s Device Profile, click
Load Profile at the bottom of the Device Pro-
file screen to send the new settings to the
meter. The meter will reboot and then you can reconnect to it. Note that you can also click Save Profile
to save your changes without sending them to the meter.
Shark® is a registered trademark of Electro Industries/GaugeTech. CommunicatorPQA
TM
, MeterManagerPQA
TM
, and Ener-
gyPQA.com
TM
are trademarks of Electro Industries/GaugeTech.
https://electroind.com/
