2665-4 Page
13
5.
SET SHOT TIMER
– The console is programmed with two timers. The timers
should be set prior to the start of a game. The shot timer is preset to 30 seconds. The
out of bounds timer is preset to 5 seconds. To change either one of these times, press
[SET SHOT TIMER]
.
The console LCD display will read:
000 D15:00 0 000
ST RESET <30>
Press the keypad numbers to set shot timer
,
[ENTER]
.
The LCD display will then
read:
00 D15:00 0 00
ST OB RESET <05>
Press the keypad numbers to set the out of bounds timer, [ENTER].
6.
AUTO HORN
– This key allows the operator to control the end of period horn and
the time out horn. The horn sounds for two seconds when the clock reaches 0:00 at
the end of the period. The end of period horn can be disabled by pressing [AUTO
HORN]
.
The console LCD display will read:
GAME PRESS<1>ON
HORN PRESS<0>OFF
Press [0], [ENTER]
to disable the horn. The console LCD display will then read:
T-O PRESS<1>ON
HORN PRESS<0>OFF
The time out horn is normally disabled. To enable the horn to sound at the end of the
time out, press
[1], [ENTER]
on the control console.
7.
TIME OF DAY
– The time of day can be displayed on the clock section of the
scoreboard.
THE GAME CLOCK WILL BE INOPERABLE UNTIL THE
TIME OF DAY FUNCTION IS TURNED OFF
. To turn the time of day clock on,
press [TIME OF DAY]
.
The console LCD display will read:
TIME OF ON <1>
DAY CLOCK OFF<0>
Press [1], [ENTER] on the control console. The console LCD display will then read:
00 C12:00 0 00
SET CLK <12:00>
Press the keypad numbers for the time
,
[ENTER]
.
The letter C will be displayed on
the console LCD display to the left of the time to indicate that the time of day
function is active. The scoreboard will display the time of day.
Electro-Mech Scoreboard Co.
•
120 Industrial Parkway
•
Wrightsville, GA 31096
Phone: (800) 445-7846
•
Fax (478) 864-0212
•
Email: score@electro-mech.com