2665-4 Page
17
Horn and Goal Lights Operation
The horn sounds for two seconds when the game clock reaches 0 seconds. It sounds for
0.5 seconds when the [HORN] key is pressed. The optional goal lights illuminate when
the horn sounds.
Hand Held Clock Control Unit Operation
The hand held clock control unit has an attached cable that is plugged into a jack on the
control console back plate labeled
Clock Hand held.
It has one button that is used to
toggle the clock on and off.
Reversible Caption Plates
There are three reversible caption plates located at the bottom of each side of the
scoreboard. These plates have the proper captions for playing volleyball and wrestling.
The caption plates are held in place with small metal tabs. To change a caption, slide the
plate out, turn it so the other side is visible, and slide it back into position. The proper set
of captions for wrestling is POINTS, MATCH, and POINTS. The proper set of captions
for volleyball is WON, GAMES, and WON.
You should reset the scoreboard each time that it is turned on. Test out all the functions
to ensure that the scoreboard is operating properly.
SCOREBOARD SHUTDOWN
1.
Place the circuit breaker for the scoreboard in the
OFF
position.
2.
Unplug the control console power cord.
3.
Unplug the extension cable.
4.
If a ScoreLink 200 RF MODEM SYSTEM is installed with this scoreboard, unplug
the Transmitter’s wall mount power supply.
5.
Store the control console and ScoreLink 200 Transmitter in a dry location. These
units are not waterproof.
Proper scoreboard shutdown will help protect the scoreboard and control console from
power surges and lightning strikes.
Electro-Mech Scoreboard Co.
•
120 Industrial Parkway
•
Wrightsville, GA 31096
Phone: (800) 445-7846
•
Fax (478) 864-0212
•
Email: score@electro-mech.com
