Revised January 22, 2018
LX2350-4 Owner's Manual
www.electro-mech.com · 800.445.7846
Page 19
MECHANICAL INSTALLATION
This section of the manual describes assembling and installing the four-sided
scoreboard display, in its standard configuration. If your scoreboard project includes
customizations with additional ID panels or requires other special mounting
considerations, please contact the factory to request details specific to your project. If
you have unique requirements and would like to change the position or size of our
mounting hardware to accommodate them, we can probably help you out. But we need
to find out BEFORE we start building the cabinets. Let your scoreboard sales rep know
about any special needs as early in the process as possible.
Additional Materials and Tools
Typically a center-hung scoreboard assembly is installed on a hoist system, which is
attached to a support beam in the building's ceiling. The assembly may be connected
to the hoist via chains, cables, rods, etc. Rather than attempting to describe all possible
options for a support mechanism, this document assumes the installer will provide a
method for hanging the scoreboard assembly that can handle the weight of all
components and will make servicing convenient.
In addition to the support system, the installer will need a 9/16-inch SAE wrench or
socket set to tighten the assembly bolts and will need people to provide support for the
cabinets and corners as the pieces are aligned. This document also assumes the
installer has access to tools and skills for working at the heights required for installing
the support system, lifting the scoreboard assembly, and making final connections.
Electro-Mech recommends you find a reputable sign installer with the equipment and
experience to handle the work mentioned above. If you are unfamiliar with sign
installers in your area, contact your scoreboard sales rep for recommendations.
